|
Item NO. /Specifications |
S-145-5 |
S-145-7.5 |
S-145-12 |
S-145-24 |
|
DC output voltage |
5V |
7.5V |
12V |
24V |
|
Output voltage error(Note: 2) |
2% |
1% |
1% |
1% |
|
Rated output current |
25A |
18A |
12A |
6A |
|
Output current rage |
0-25A(biggest 30A) |
0-18A(biggest 21A) |
0-12A(biggest 14A) |
0-25A(biggest 7A) |
|
Wave and noise (Note: 3) |
100mVp-p |
100mVp-p |
100mVp-p |
100mVp-p |
|
Inlet stability (Note: 4) |
0.5% |
0.5% |
0.3% |
0.2% |
|
Load stability (Note: 5) |
0.5% |
0.5% |
0.3% |
0.2% |
|
DC output power |
125W |
135W |
144W |
144W |
|
Efficiency |
78% |
80.5% |
80.5% |
83.5% |
|
Adjustable range for DC voltage |
4.75-5.5V |
6-8V |
10.8-13.2V |
21-28V |
|
AC input voltage range |
85~132VAC/180~264VAC selected by switch
47~63Hz; 240~370VDC |
|
Input current |
2.4A/115V 1.2A/230V |
|
AC Inrush current |
Cold-start current 30A/115V
60A/230V |
|
Leakage current |
<1mA/240VAC |
Overload
proctection
|
105~150%
|
105~150% |
150~200% |
105~150% |
|
Type: Output shutdown Reset: Recycle AC
ON/OFF |
|
Over-voltage protection |
|
|
High-temperature protection |
|
|
Temperature coefficient |
0.03%/(0~50) |
|
Setup rise hold up time |
200ms, 50ms, 20ms |
|
Vibration |
10~500Hz, 2G 10min,/1 cycle, Period for
60min, Each axes |
|
Withstand voltage |
Input and output internal: 1.5KvAC, Input
and enclosure: 1.5KvAC, Output and enclosure:
0.5KvAC |
|
Isolation resistance |
Input and output internal: Input and
enclosure, Output and enclosure: 500VDC/100M |
|
Working temperature and hunmidity |
-10~+60(Refer to output derating
curve), 20%~90%RH
|
|
Store temperature and humidity |
-20℃~+85℃, 10%~95%RH |
|
Overall dimension |
1999838mm |
|
Weight |
0.65Kgs |
|
Safety standards |
Meet UL 1012 requirement (Not apply for
the mark) |
|
EMC standards |
Meet FCC PART15J Conduction class
B |
| |
Note:1. The testing
condition for the paramenter above is: 230VAC input, rated
load, 25 70% RH.Humidity.
2. Error.include the setting
error,line stability and load stability.(Note:5)
3. Wave
test: adopting"A12" double wire for 20MHz, and 0.1
UF&47UF capacitor short-circuit for interrupting.
4.
Inlet voltage stability test: when is over load, the lowest
voltage of inlet is up to the highest voltage.
5. Load
stability test: The load is from 0% to 100%.
|
